2008 Honda Odyssey Motor Mounts Replacement

2008 Honda Odyssey Motor Mounts Replacement

We are noticing engine noise and vibration from inside our 2008 Honda Odyssey van. A local mechanic took a look and advised that the driver's side motor mount needs to be replaced - this aligns with where we were hearing the majority of the noise and vibration. Researching a DIY solution.....   YouTube Video from Lodestar   YouTube Video from MrRangerZr1   YouTube Video from BriansMobile   YouTube Video from HowToAutomotive   YouTube Video from LeekAutoRepair ...
Read More

2008 Honda Odyssey Broken Lug Bolt Repair

Steps for removing broken or damaged lug bolts and installing new lug bolts WITHOUT removing the hub: 1 - Raise car - remove tire 2 - Remove caliper from disc, remove brake hose clamp connecting it to strut housing, and hang caliper out of the way (no need to disconnect brake line) 3 - Remove caliper bracket (2 bolts on back near dust shroud) 4 - Remove 2 phillips screws connecting disc to hub and remove rotor disc 5 - Locate an area on the backing where there is clearance to slide the lug bolts out 6 - Position the damaged lug bolt to be removed 7 - Push/knock the damaged lug bolt out from the hub 8 - Insert the new lug bolt. It may be necessary to grind down a portion of the lug bolt head. 9 - Seat the new lug bolt with the ball joint separator 10 - Reassemble Link to Gokhan's article about using the Ball Joint Separator to remove and seat your lug bolts...
Read More