My Favorite Electric Guitar Compressor Pedal

My Favorite Electric Guitar Compressor Pedal

Through the last 35 years I've played a lot of Compressor pedals for electric guitar. CMATMODS Compressor is my favorite that I've stuck with. CMAT Mods was founded by Chad Matthews and became a full-time enterprise when he began working with pedal builder Greg Blessing. The CMATMODS Compressor emulates the renowned Ross Compressor....
Read More
Egnater Tweaker 15-Watt Guitar Amp

Egnater Tweaker 15-Watt Guitar Amp

Love this amp! Tweaker Features and Information 15 Watts Amplifier 2 x 6V6 Power Tubes 3 x 12AX7 Pre-amp Tubes Master Volume, Gain and 3-Band EQ Modern/Vintage Amp Voicing Switch Buffered Effects Loop Selectable AC, British and American Tone Controls Clean/Hot Gain Selector Tight & Bright Voicing Switches 100V / 115V / 230V Switchable 14" (L) x 8.25" (W) x 6.75 (H)   SPECIFICATIONS Output Power: Input Impedance: Output Impedance: Effects Loop Send Impedance: Effects Loop Return Impedance: THD: Tubes:Switches Vintage/Modern:USA/AC/Brit: Clean/Hot Switch: Tight Switch: Bright Switch: Dimensions: 15watts RMS Cathode Biased 1meg Ohm 4 Ohms, 8 Ohms Or 16 Ohms Switch Selectable 600 Ohms 220k Ohms 5% At Rated Output Three Egnater Premium Selected 12AX7Matched Pair Of Selected 6V6GTA+4db @ 120hz +4db @ 3.6KHz Selects American, V-X, British Tone Stack +9db Gain Boost -6db @ 180hz +8db @ 4khz Max 14” (L) X 8.25” (W) X 6.75” (H) Click here to visit the website....
Read More
Pedalboard Power Supplies – Gator G-bus

Pedalboard Power Supplies – Gator G-bus

GATOR G-Bus Pedalboard Power Supply Click here to visit the website. 1700 Milliamp Regulated 9V & 18V Multi-Output DC Power Source for Pedals Multi-Output Power Supply for Guitar Effects Pedals Built-In Short Circuit Protection with Reset Heavy-Duty Aluminum Housing 4 Holes for Mounting to Any Pedal Board Brass Cylinders Within Mounting Holes Protect Circuitry Eight (8) 9v Outputs and Three (3) 18v Outputs Can Power Up to 11 Standard Stomp Box Pedals Includes Eight (8) 9 Volt 24" Straight End Cables Includes One (1) 18 Volt 24" Straight End Cable ...
Read More
PALMER POCKET AMP MK 2

PALMER POCKET AMP MK 2

Featuring a durable die cast aluminium enclosure with balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks the Palmer Pocket Amp MK 2 is more than just the go-to tool for direct recording. It doubles as a practice amp, overdrive and distortion pedal, standard guitar DI box when bypassed and replaces your stage amp when used with a sound and monitor system. The Pocket Amp MK 2 works on a 9V battery or optional power adapter, e.g. Palmer PW9V. Click here to visit the website. Product type: Guitar Amplifiers Technology: solid state Power: n.a. W Inputs: 1 Input connectors: 6.3 mm Jack Input impedance: 1 M Ohm(s) Outputs: 3 Output connectors: 3.5 mm jack, 6.3 mm Jack, XLR Output impedance: 510 Ohm(s) Channels: 1 Indicators: on/off Controls: mic position, mode, Treble, amp select, Bass, Drive, Gain, ground lift, level FX loop: no Operating voltage: 9 V DC, 9 V block Cabinet material: die-cast aluminium Width: 100 mm Depth: 100 mm Height: 55 mm Weight: 0.36 kg ...
Read More
BluBOX Impulse Response Speaker Emulator

BluBOX Impulse Response Speaker Emulator

Stumbled upon the BluBOX today. Here's the video and specs. Tech Specs Connections:Line In, Line Out, Speaker In, Speaker Through (Jacks), Transformer Balanced XLR Mic Out Voltage:9V-18V DC 200mA Dimensions:120 x 95 x 38 mm (4,72" x 3,74" x 1,49") Weight:350g / 12.35oz Latency: Ultra low latency ~1 ms = Distance of 30cm to a cabinet Click here to visit the website. Cabinets NANOCAB™BluGuitar® 1x12“ FATCAB™BluGuitar® 1x12“ STACK 1965Original Marshall® 4x12”Celestion® (Alnico 15Watts) STACK 1967Original Park® 4x12” Celestion® (Greenback 25 watts) STACK 1970Original Marshall® 4x12” Celestion® (Greenback 25 Watts 55 Hz) STACK 1971Original Marshall® 4x12” Celestion® (G12h30) STACK 1980Original Marshall® 4x12” Celestion® (G12h75) METAL V30Mesa/Boogie® Rectifier® Standard 4x12” Celestion® V30 METAL CL80Celestion® Classic Lead 80 in custom built 4x12” cabinet JAZZ 120Roland® Jazz Chorus® 120 TWEED 1x12Vintage ´57 Fender® Tweed Deluxe® SILVER 1x12Fender® Princeton® Silverface 1x12“ BLACK 2x10Fender® ´64 Vibroverb® 2x10“ BLACK 2x12Vintage Fender® Twin Reverb® 2x12” orange JBL® mixed with Jensen® C12K Black 4x10Vintage 60s Fender® Super Reverb® 4x10“ BLUE 2x12Original Vox® AC30 JMI® 2x12” Celestion® Blue Bulldog...
Read More
PDI 09 – PASSIVE DI BOX FOR GUITARS

PDI 09 – PASSIVE DI BOX FOR GUITARS

The PDI09 can be connected between an effect device or amplifier and the mixing console. The PDI09 is not suitable for direct connection to a guitar. Integrated filter circuits simulate the authentic "speaker" sound. Tone can be varied between "Mellow", "Normal", or "Bright". Click here to visit the website. Product type: Speaker Simulators Channels: 1 Input type: unbalanced Inputs: 1 Input connectors: 6.3 mm Jack Output type: balanced Outputs: 1 Output connectors: 6.3 mm Jack, XLR Output impedance: 600 Ohm(s) Controls: voicing, attenuator Dummy load: no Max. load: Dependent on load, max. 200 W Voicing filter: yes Power attenuator: no Transformer isolated outputs: yes Cabinet material: die-cast aluminium Cabinet surface: powder coated Width: 120 mm Depth: 60 mm Height: 35 mm Weight: 0.284 kg ...
Read More