Featuring a durable die cast aluminium enclosure with balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks the Palmer Pocket Amp MK 2 is more than just the go-to tool for direct recording. It doubles as a practice amp, overdrive and distortion pedal, standard guitar DI box when bypassed and replaces your stage amp when used with a sound and monitor system. The Pocket Amp MK 2 works on a 9V battery or optional power adapter, e.g. Palmer PW9V.
Click here to visit the website.
Product type:
Guitar Amplifiers
Technology:
solid state
Power:
n.a. W
Inputs:
1
Input connectors:
6.3 mm Jack
Input impedance:
1 M Ohm(s)
Outputs:
3
Output connectors:
3.5 mm jack, 6.3 mm Jack, XLR
Output impedance:
510 Ohm(s)
Channels:
1
Indicators:
on/off
Controls:
mic position, mode, Treble, amp select, Bass, Drive, Gain, ground lift, level
FX loop:
no
Operating voltage:
9 V DC, 9 V block
Cabinet material:
die-cast aluminium
Width:
100 mm
Depth:
100 mm
Height:
55 mm
Weight:
0.36 kg
...
Stumbled upon the BluBOX today. Here's the video and specs.
Tech Specs
Connections:Line In, Line Out, Speaker In, Speaker Through (Jacks),
Transformer Balanced XLR Mic Out
Voltage:9V-18V DC 200mA
Dimensions:120 x 95 x 38 mm (4,72" x 3,74" x 1,49")
Weight:350g / 12.35oz
Latency:
Ultra low latency
~1 ms = Distance of 30cm to a cabinet
Click here to visit the website.
Cabinets
NANOCAB™BluGuitar® 1x12“
FATCAB™BluGuitar® 1x12“
STACK 1965Original Marshall® 4x12”Celestion® (Alnico 15Watts)
STACK 1967Original Park® 4x12” Celestion® (Greenback 25 watts)
STACK 1970Original Marshall® 4x12” Celestion® (Greenback 25 Watts 55 Hz)
STACK 1971Original Marshall® 4x12” Celestion® (G12h30)
STACK 1980Original Marshall® 4x12” Celestion® (G12h75)
METAL V30Mesa/Boogie® Rectifier® Standard 4x12” Celestion® V30
METAL CL80Celestion® Classic Lead 80 in custom built 4x12” cabinet
JAZZ 120Roland® Jazz Chorus® 120
TWEED 1x12Vintage ´57 Fender® Tweed Deluxe®
SILVER 1x12Fender® Princeton® Silverface 1x12“
BLACK 2x10Fender® ´64 Vibroverb® 2x10“
BLACK 2x12Vintage Fender® Twin Reverb® 2x12” orange JBL®
mixed with Jensen® C12K
Black 4x10Vintage 60s Fender® Super Reverb® 4x10“
BLUE 2x12Original Vox® AC30 JMI® 2x12” Celestion® Blue Bulldog...
The PDI09 can be connected between an effect device or amplifier and the mixing console. The PDI09 is not suitable for direct connection to a guitar. Integrated filter circuits simulate the authentic "speaker" sound. Tone can be varied between "Mellow", "Normal", or "Bright".
Click here to visit the website.
Product type:
Speaker Simulators
Channels:
1
Input type:
unbalanced
Inputs:
1
Input connectors:
6.3 mm Jack
Output type:
balanced
Outputs:
1
Output connectors:
6.3 mm Jack, XLR
Output impedance:
600 Ohm(s)
Controls:
voicing, attenuator
Dummy load:
no
Max. load:
Dependent on load, max. 200 W
Voicing filter:
yes
Power attenuator:
no
Transformer isolated outputs:
yes
Cabinet material:
die-cast aluminium
Cabinet surface:
powder coated
Width:
120 mm
Depth:
60 mm
Height:
35 mm
Weight:
0.284 kg
...
Radial Engineering's amp and cabinet speaker emulator.
*Guitar amp simulator for pedalboards
*Eliminates the need to bring an amp to the gig
*4 x 12 half-stack & open back combo tones
*Employs Radial’s popular JDX tone shaping
Click here to visit the website.
Specifications
Circuit Type:
Class-A BiFET input buffer with electronic frequency shaping circuitry
Frequency Response:
Shaped for guitar use
Dynamic Range:
83dB to 100dB
Total Harmonic Distortion::
<0.01%
Noise:
-78dBU
Intermodulation Distortion:
>0.1 @ -15dBu Out
Maximum Input:
> +5dBu
Maximum Gain - input to XLR output:
0dB
Minimum Gain - input to 1/4" output:
-5.8dB
Clip Level - XLR output:
> +5dBu
Output Impedance - XLR output:
600 Ohms
Output Impedance - 1/4" output:
100 Ohms
Mechanical
Power:
40mA, 9VDC (center pin negative)
Construction:
14-gauge steel chassis and outer shell
Finish:
Durable powder coat
Shipping Weight:
1.6 lbs. (.7 kg)
Size:
4.75" x 3.625" x 2" (121 x 92 x 51mm)
Warranty:
Radial 3-year, transferable
Specifications are subject to change without notice.
...
Click here to visit the website.
Red Box 5
INPUT
6,3 mm (1/4“) jack
THRU
6,3 mm (1/4“) jack
OUTPUT
XLR, balanced
POWER SUPPLY
Phantom powered (48 Volts, 10mA)
EXTERNAL POWER SUPPLY
9-24 Volts AC or DC (optional)
BATTERY
9 Volts (optional)
DIMENSIONS
115 x 40 x 60 mm
WEIGHT
0,2 kg
...
