PALMER POCKET AMP MK 2

PALMER POCKET AMP MK 2

Featuring a durable die cast aluminium enclosure with balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks the Palmer Pocket Amp MK 2 is more than just the go-to tool for direct recording. It doubles as a practice amp, overdrive and distortion pedal, standard guitar DI box when bypassed and replaces your stage amp when used with a sound and monitor system. The Pocket Amp MK 2 works on a 9V battery or optional power adapter, e.g. Palmer PW9V. Click here to visit the website. Product type: Guitar Amplifiers Technology: solid state Power: n.a. W Inputs: 1 Input connectors: 6.3 mm Jack Input impedance: 1 M Ohm(s) Outputs: 3 Output connectors: 3.5 mm jack, 6.3 mm Jack, XLR Output impedance: 510 Ohm(s) Channels: 1 Indicators: on/off Controls: mic position, mode, Treble, amp select, Bass, Drive, Gain, ground lift, level FX loop: no Operating voltage: 9 V DC, 9 V block Cabinet material: die-cast aluminium Width: 100 mm Depth: 100 mm Height: 55 mm Weight: 0.36 kg...
Read More
PDI 09 – PASSIVE DI BOX FOR GUITARS

PDI 09 – PASSIVE DI BOX FOR GUITARS

The PDI09 can be connected between an effect device or amplifier and the mixing console. The PDI09 is not suitable for direct connection to a guitar. Integrated filter circuits simulate the authentic "speaker" sound. Tone can be varied between "Mellow", "Normal", or "Bright". Click here to visit the website. Product type: Speaker Simulators Channels: 1 Input type: unbalanced Inputs: 1 Input connectors: 6.3 mm Jack Output type: balanced Outputs: 1 Output connectors: 6.3 mm Jack, XLR Output impedance: 600 Ohm(s) Controls: voicing, attenuator Dummy load: no Max. load: Dependent on load, max. 200 W Voicing filter: yes Power attenuator: no Transformer isolated outputs: yes Cabinet material: die-cast aluminium Cabinet surface: powder coated Width: 120 mm Depth: 60 mm Height: 35 mm Weight: 0.284 kg...
Read More
Tonebone JDX Direct-Drive

Tonebone JDX Direct-Drive

Radial Engineering's amp and cabinet speaker emulator. *Guitar amp simulator for pedalboards *Eliminates the need to bring an amp to the gig *4 x 12 half-stack & open back combo tones *Employs Radial’s popular JDX tone shaping Click here to visit the website. Specifications Circuit Type: Class-A BiFET input buffer with electronic frequency shaping circuitry Frequency Response: Shaped for guitar use Dynamic Range: 83dB to 100dB Total Harmonic Distortion:: <0.01% Noise: -78dBU Intermodulation Distortion: >0.1 @ -15dBu Out Maximum Input: > +5dBu Maximum Gain - input to XLR output: 0dB Minimum Gain - input to 1/4" output: -5.8dB Clip Level - XLR output: > +5dBu Output Impedance - XLR output: 600 Ohms Output Impedance - 1/4" output: 100 Ohms Mechanical Power: 40mA, 9VDC (center pin negative) Construction: 14-gauge steel chassis and outer shell Finish: Durable powder coat Shipping Weight: 1.6 lbs. (.7 kg) Size: 4.75" x 3.625" x 2" (121 x 92 x 51mm) Warranty: Radial 3-year, transferable Specifications are subject to change without notice....
Read More
Hughes & Kettner Red Box 5 DI and Speaker Simulator

Hughes & Kettner Red Box 5 DI and Speaker Simulator

Click here to visit the website. Red Box 5 INPUT 6,3 mm (1/4“) jack THRU 6,3 mm (1/4“) jack OUTPUT XLR, balanced POWER SUPPLY Phantom powered (48 Volts, 10mA) EXTERNAL POWER SUPPLY 9-24 Volts AC or DC (optional) BATTERY 9 Volts (optional) DIMENSIONS 115 x 40 x 60 mm WEIGHT 0,2 kg...
Read More